bidsvova.blogg.se

Setting up ftp server on home network
Setting up ftp server on home network











setting up ftp server on home network
  1. #Setting up ftp server on home network how to
  2. #Setting up ftp server on home network install
setting up ftp server on home network

Please type in address ftp: //WAN IP to access to it. You can also access the FTP server from external network.

#Setting up ftp server on home network install

Use the command given below to install VSFTPD. We will start off by installing it on our system. Port 21 is the default value and you may no change it. VSFTPD is the default FTP server for most Linux distributions.

setting up ftp server on home network

FTP Server: Check the IP address of your FTP servers and type it in. Complete the FTP information as followed. Here the LAN IP address of the router is 192.168.1.1. Click Device Settings Network Advanced and choose the Set Up button next to FTP. Then type in your account to access to the FTP server. Please open the web browser and type in address ftp: //LAN IP, press enter. Now the FTP server can be accessed by local network. Volume Name - From the pull-down list, select which volume to save the file under.įolder Path- Path to the folder is determined by where the file is saved.įolder Name - Name of the shared folder, customized by users.Įnable Authentication - Select the check box to require users to log in with a username and password.Įnable Write Access - Select the check box to allow users to make changes to the folder content.Įnable Media Sharing - Enable media server function If you want to customize the shared content, switch off Share All, and click on Add to choose your specific folder. It is set to share all the files by default. If check on Use Default Account, it would be admin/admin. If you choose Use New Account, you will have a separate login account for the USB device. On the Folder Settings part below, the Network/Media Server Name can be changed to something else. If there is no device listed on this page, please click Scan. And you can also try unplug the USB device and plug it back in.Ĭheck the options FTP and FTP (via Internet) to enable FTP server function. Check whether the USB device is identified by the modem router.

#Setting up ftp server on home network how to

Please refer to How to log into the web-based management interface of Archer CR700?Ĭlick Advanced on the top, then click USB Settings -> Disk Settings on the left side menu. Double-click Internet information services (IIS) manager. Plug a USB storage device into the USB port, and make sure the USB light lit up on the router. Note: Archer CR700 is used for demonstration in this article.













Setting up ftp server on home network